Before using the tablet press, it is necessary to repeatedly check the quality of the die, whether there are missing edges, cracks, deformation and incomplete tightness and whether the device is complete and good.
Check whether the powder of the granule raw material is dry and the powder content in the granule should not exceed 10% as much as possible. If unqualified, do not press hard, otherwise it will affect the normal operation and service life of the tablet press and the loss of raw materials.
For the first test run, place the indicator needle controlled by the pressure regulator on 6, pour the powder into the bucket, turn the test run handwheel by hand, adjust the filling and pressure at the same time, and gradually increase the weight and hardness of the tablet to meet the requirements of the finished product , and then start the motor first, then open the clutch, and start the official production.
During the production process, the quality of the tablets must be checked regularly to see if they meet the requirements, and adjustments should be made if necessary.
The choice of speed has a direct impact on the service life of the tablet press. Due to the nature and viscosity of the raw materials, the size of the tablet diameter and the pressure cannot be uniformly specified. The structure of the tablet press is infinitely variable.
The slow speed is suitable for pressing minerals. , plant herbs, large sheet diameter, poor viscosity, etc. and materials that are difficult to form quickly. Fast for press-bonded, lubricious and easy-to-form materials.
Therefore, the tablet press user must decide according to the actual situation. Managers must be familiar with the technical performance and internal structure of the machine, the operating principle of the control tablet machine and the working location during operation, in order to prevent failure and damage to the machine parts, so as to ensure safe production as a premise.
During use, you should always pay attention to whether the sound of the tablet press is normal. If there is a scream or a strange sound, stop for inspection and eliminate it, and do not use it reluctantly.
The above is the industry sharing about tablet presses, I hope everyone can like it.