Labeling Machine For Bottles

Labeling Machine For Bottles

The tabletop SED-YDT-D applies roll-fed self-adhesive labels to upright round bottles. It combines conveyor transport, product and label sensing, a rolling application mechanism and touchscreen operation in an integrated tabletop arrangement.
Send Inquiry
Chat Now
Description

Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of labeling machine for bottles in China. Welcome to wholesale customized labeling machine for bottles at competitive price from our factory. Contact us for cheap products and discount information.

 

Products Description

The tabletop SED-YDT-D is an automatic labeling machine for applying roll-fed self-adhesive labels to upright round bottles. The machine combines a conveyor, labeling head, rolling application assembly and integrated control enclosure. Its compact tabletop arrangement keeps the label roll, application area and operator interface accessible during setup.

Conveying and label application

Bottles travel along the conveyor to the labeling position. A product sensor detects the container and sends a signal to the programmable controller. The controller coordinates the traction mechanism with the labeling sequence, while a separate label sensor identifies the labels on the web.

The label strip passes from the supply reel through the guide rollers and traction assembly to the dispensing edge. The label separates from its backing and is applied to the bottle. The rolling assembly then presses the label around the container, and the conveyor carries the labeled product toward collection.

The photographed machine shows the label reel and traction components above the conveyor, with guide rails beside the bottle path. The rolling assembly sits beside the application area. The label web and guide rollers remain accessible so the roll can be installed and threaded for the intended labeling job.

Adjustments and controls

The labeling head and its adjustment assembly allow the application position to be aligned with the bottle. The rolling mechanism and conveyor guides are set to suit the product. Label alignment depends on the bottle, the label and the setup, so the product and label samples are used when preparing the machine configuration.

A touchscreen human-machine interface provides the operating controls. The product-detection and label-detection signals are processed by the programmable controller to coordinate label feeding. The front control enclosure includes operating buttons and an emergency-stop control, with the power isolator positioned on its side.

Label preparation and routine care

Labels are supplied as rolls. The backing paper should be free of cuts or damage that could interfere with traction and dispensing. During setup, the strip is threaded through the labeling head and aligned with the bottle application position. The label supplier's die cutting and the condition of the backing paper affect reliable web handling.

Routine care includes removing discarded backing-paper scraps and keeping the conveyor, rollers and sensor surfaces clean. The labeling head and rolling mechanism should be checked after a product changeover. Operation, adjustment and maintenance should be carried out by trained personnel using the instructions supplied for the actual machine.

Products Specification
Parameter Specification
Model SED-YDT-D(台式)
Machine arrangement Tabletop upright round-bottle labeler
Reference labeling speed Approximately 0–80 products/min; depends on product and label size
Reference labeling accuracy ±1 mm; excludes product and label errors
Applicable product diameter 10–90 mm
Applicable product height 30–200 mm
Label length range 10–300 mm
Label backing-paper width 10–150 mm
Label-roll core inner diameter 76 mm
Supply voltage AC 220 V
Supply frequency 50 Hz
Approximate machine dimensions (L × W × H) 1200 × 935 × 750 mm
Approximate machine weight 100 kg
Operating ambient temperature 0–50 °C
Operating ambient humidity 15–85%
Reference label gap 2–3 mm ±0.2 mm
Recommended label backing Glassine; avoid cuts or damage to the backing paper
Main construction materials Stainless steel and aluminum alloy; grade depends on the specified configuration
Features
  • Automatic conveyor-fed labeling for upright round bottles.
  • Roll-fed label supply with traction and rolling application mechanisms.
  • Programmable control with separate product and label detection.
  • Touchscreen operating interface in the tabletop control enclosure.
  • Adjustable labeling-head position and bottle-guiding arrangement.
  • Accessible label path for roll installation and threading.
  • Emergency-stop control and side-mounted power isolation.

Hot Tags: Labeling Machine For Bottles, China, manufacturers, customized, wholesale, price, cheap, discount, Labeling Machine For Round Bottles, Square Bottle Labeling Machine, Fully Automatic Round Bottle Labeling Machine, Multifunctional Automatic Labeling Machine, Automatic Sticker Labeling Machine With Printer, Labeler Machine For Bottles