Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of SED-260P-B Flat Plate Pharmaceutical Blister Packing Machine in China. Welcome to wholesale customized SED-260P-B Flat Plate Pharmaceutical Blister Packing Machine at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-260P-B is a flat plate blister packing machine for capsules, tablets and other compatible products. With suitable product feeding and tooling, it can also package selected medical devices, foods, electronic items and small hardware. Positive-pressure forming, product feeding, plate heat sealing and punching run in a synchronized production sequence. A PLC, temperature control module, touchscreen interface and independent servo web-traction system coordinate the principal operations. Blister cavities, the feeder and card layout can be matched to the product and packaging materials. Confirm the required mould set and feeding arrangement for each product before production.
Blister forming and packaging sequence
Packaging material is drawn from the roll and heated before positive pressure shapes the blister cavities. Reference PVC preheating temperatures are approximately 110 °C at the upper plate and 100 °C at the lower plate; the settings depend on the PVC grade, thickness and mould. The feeder then places products into the formed cavities, the lidding material is plate-sealed to the web, and finished cards are punched from the strip. The forming, feeding, sealing and punching stations operate as one coordinated line. Punching frequency is measured in strokes per minute, while finished-card output also depends on the number of cards cut in each stroke.
Tooling adjustment and operator control
The mould stations sit on adjustable machine-bed guide rails. A worm, gear and rack drive moves tooling along the base to accommodate different card layouts. Forming, sealing and embossing tooling is located by pins and held by pressure plates for accurate positioning and changeover. The independent servo traction system lets operators set web travel on the touchscreen from 20 to 170 mm without a mechanical stroke adjustment. This adjustment supports different blister-card lengths within the specified forming area. Print-mark registration and an external safety cover are optional configurations and should be specified when required for the production line.
Capacity and format limits
Punching frequency is 30–35 strokes per minute. Deeper cavities, mechanically formed blisters or longer cards can lower the operating frequency. Rated output is up to 5,400 cards per hour for a 130 × 76.5 mm standard card with three cards per stroke; other card layouts produce a different count. Maximum forming dimensions are 250 × 160 mm with a maximum depth of 26 mm, and packaging material width is limited to 260 mm. The specified material range includes 0.15–0.6 mm rigid PVC and 50–100 g/m² dialysis paper. Coated PTP aluminium foil is a compatible lidding material; foil thickness must suit the selected tooling and sealing setup. Roll-core bore is 70–76 mm.
Utilities and installation
The machine uses a 380 V, 50 Hz electrical supply. Its main drive motor is rated at 1.5 kW, forming heating at 1.5 kW and heat sealing at 1.5 kW. The final electrical installation should account for the selected configuration and all connected auxiliaries. Compressed air is customer-supplied at more than 0.2 m³/min and 0.4–0.6 MPa. Tap water or recirculating water for mould cooling is also customer-supplied at approximately 60 L/h. Machine dimensions are 3350 × 650 × 1602 mm (length × width × height), and weight is approximately 1600 kg. Allow space around the equipment for material rolls, utility connections, operation and tooling service.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-260P-B |
| Machine type | Flat plate blister packing machine |
| Punching frequency | 30–35 strokes/min; lower with deeper blisters, mechanical forming or longer cards |
| Rated output at reference format | Up to 5,400 cards/h with 130 × 76.5 mm cards and 3 cards/stroke |
| Maximum forming size and depth | 250 × 160 mm; 26 mm depth |
| Servo traction stroke | 20–170 mm, set on touchscreen |
| Maximum packaging material width | 260 mm |
| Rigid PVC thickness | 0.15–0.6 mm |
| PTP lidding material | Coated PTP aluminium foil |
| Dialysis paper | 50–100 g/m² |
| Roll-core bore | 70–76 mm |
| Forming heater rating | 1.5 kW |
| Heat-sealing heater rating | 1.5 kW |
| Main motor rating | 1.5 kW |
| Electrical supply | 380 V, 50 Hz |
| Compressed air | >0.2 m³/min at 0.4–0.6 MPa; customer-supplied |
| Mould cooling | Tap or recirculating water, approximately 60 L/h; customer-supplied |
| Dimensions (L × W × H) | 3350 × 650 × 1602 mm |
| Machine weight | Approximately 1600 kg |
Features
- Integrated positive-pressure blister forming, feeding, plate heat sealing and punching sequence.
- PLC and touchscreen control with a temperature module and independent servo web traction.
- Touchscreen setting of the 20–170 mm traction stroke for different blister-card lengths.
- Guide-rail-mounted tooling with pin location and pressure-plate clamping for format changes.
- Print-mark registration and an external safety cover are available as configuration options, subject to confirmation.
Hot Tags: SED-260P-B Flat Plate Pharmaceutical Blister Packing Machine, China, manufacturers, customized, wholesale, price, cheap, discount, Capsule Blister Packing Machine, Blister Packaging Machine Pharmaceutical Industry, Blister Packaging Machine For Sale


