Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of tablet blister packing machine in China. Welcome to wholesale customized tablet blister packing machine at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-140P-A is an automatic blister packaging machine for tablets, capsules and other suitable solid products. It brings forming, product feeding, heat sealing, cutting and finished-pack discharge into a coordinated packaging process. The model is offered in aluminium-plastic and aluminium-aluminium configurations. The selected packaging material, moulds and feeding arrangement determine the configuration used for the product being packed.
In the aluminium-plastic process, the plastic sheet passes through heated forming plates before compressed air forms the blister pockets. An encoder controls the positive-pressure forming operation. The formed material then moves through the working stations at the selected pulling length. Forming tools establish the blister shape, while the control settings coordinate the movement of the material with the forming cycle.
An automatic feeder supplies the solid product to the formed pockets. The mould and feeder can be designed for the particular product and pack layout. Tablets and capsules therefore require a suitable feeding arrangement and corresponding blister tooling. The machine transfers the loaded blister material toward the sealing section, where the covering material is brought together with the formed web.
The sealing section applies heat from the upper heated plate. Pneumatic actuation operates the heat-sealing mechanism. When the machine stops, the heat-sealing moulds separate automatically to help protect the packaging material from prolonged contact with the hot tooling. After sealing, the material passes toward the cutting section and the completed blister packs are discharged from the machine.
The touchscreen provides an operator interface for the programmable control system. The pulling length can be entered through the interface, and an inverter provides adjustable operating speed. Controlled pulling and synchronous clamping coordinate material travel through the working stations. These controls allow the operator to set the machine for the selected blister format within the documented operating limits.
Locating grooves position the moulds during installation and changeover. This arrangement helps locate replacement tooling when the blister format changes. Product-specific moulds and feeders are selected according to the product and packaging requirement. The mould-cooling circuit uses a water supply, and the required electrical and compressed-air services are listed in the specification table.
Batch-number embossing, an easy-opening perforation or impression line, and waste-material collection are available as selected functions. These additions are specified to suit the required pack rather than treated as included in every configuration. The machine is intended for solid-product blister packaging in pharmaceutical, food and related applications, with the final material and tooling arrangement selected for the particular product.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-140P-A |
| Product application | Tablets, capsules and other suitable solid products |
| Packaging configuration | ALU-PVC or ALU-ALU; corresponding material and tooling selected for the required configuration |
| Punch frequency, ALU-PVC | 15–30 cycles/minute |
| Punch frequency, ALU-ALU | 15–25 cycles/minute |
| Maximum forming area | 140 × 110 mm |
| Standard forming depth | ≤15 mm |
| Custom forming depth | Up to 20 mm, customized tooling |
| Standard stroke range | 30–120 mm; other stroke arrangements can be designed to requirement |
| Working air pressure | 0.4–0.6 MPa |
| Specified air-compressor output | ≥0.4 m³/minute |
| Electrical supply | 220 V, single phase, 50 Hz |
| Total installed power | 5.5 kW |
| Main motor power | 1.2 kW |
| PVC hard-sheet thickness | 0.15–0.5 mm |
| PVC hard-sheet width | 160 mm |
| PTP aluminium-foil thickness | 0.02–0.035 mm |
| PTP aluminium-foil width | 160 mm |
| Listed dialysis-paper width | 160 mm |
| Mould cooling | Tap water or recirculating water |
| Overall dimensions (L × W × H) | 2,400 × 650 × 1,450 mm |
| Listed machine weight | 800 kg |
| Listed noise index | <75 dB(A) |
| Control system | Programmable controller, touchscreen and frequency inverter |
| Selected additional functions | Batch-number embossing; perforation or impression line; waste-material collection |
Features
- Automatic forming, product feeding, heat sealing, cutting and discharge.
- Heated-sheet and compressed-air forming for the aluminium-plastic process.
- Encoder-controlled positive-pressure forming operation.
- Touchscreen interface and programmable machine control.
- Pulling length entered through the operator interface.
- Operating speed adjusted through a frequency inverter.
- Automatic feeding with product-specific mould and feeder selection.
- Locating grooves assist mould positioning during changeover.
- Heat-sealing moulds separate automatically when the machine stops.
- Optional embossing, easy-opening lines and waste-material collection.
Hot Tags: tablet blister packing machine, China, manufacturers, customized, wholesale, price, cheap, discount, Blister Packaging Machine Pharmaceutical Industry, Blister Packaging Machine For Sale, Capsule Blister Packing Machine


