Herbal Capsule Filling Machine

Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of herbal capsule filling machine in China. Welcome to wholesale customized herbal capsule filling machine at competitive price from our factory. Contact us for cheap products and discount information.

Herbal Capsule Filling Machine　

Products Description of Capsule Filling Machine

1. When the machine normally works for a long time, the parts directly in contact with the medicine should be cleaned regularly. When the drug batch is changed or the use period is long, it should also be cleaned.

2. The transmission mechanism under the working surface of the machine should always be added with an appropriate amount of lubricating oil (grease) to reduce the wear of moving parts.

3. The oil quantity of the main reducer should be checked once a month. If it is insufficient, refuel in time. Lubricating oil should be changed every six months. The indexing box of the turntable should be replaced every 3000h. According to experience, 90 is usually used. #Motor oil.

4. When the machine is overloaded, the safety clutch plays a protective role. When the load is normal, the clutch should not slip, but due to long-term use, the clutch may also slip. When slipping occurs 

during normal use, the clutch round nut can be tightened. In order to ensure the normal operation of the machine, it can play a protective role.

5. The main function of the vacuum separator of the vacuum system is to suck the capsule into the upper and lower modules during the hard capsule filling process, and separate the bottle cap from the valve body. 

If the capsule cannot be separated from the cap and body, subsequent filling cannot be performed. The turntable of the machine runs one station at a time, the main shaft of the machine rotates once, 

and the vacuum separator moves up and down once under the action of the cam. If the separation between the capsule cover and the main body is not smooth, check the gap between the upper plane 

of the vacuum separator and the lower plane of the lower module. If the gap is too large, the vacuum degree of the vacuum system cannot reach the vacuum degree (0.05MPa) required to separate the 

bottle cap and the main body. If the gap is too small, it is easy to collide and deform the lower part. Module. When you need to adjust the position of the vacuum separator, please use the handle to turn 

the main shaft to raise the vacuum separator to the highest position, and then loosen the lock nuts at both ends of the adjusting rod under the machine tool table (one for left-handed nuts and one for 

right-handed nuts) ), then turn the adjusting rod to adjust the height of the vacuum separator, then tighten the nut, and use the handle to rotate the main motor shaft to test until it is suitable. The 

vacuum degree is read on the vacuum gauge on the machine operation panel. When the vacuum degree is too high, the vacuum degree adjustment valve can be opened appropriately. When the 

vacuum degree is too low, the vacuum degree regulating valve can be closed or closed. The filter of the vacuum system should be opened regularly to remove the clogged dirt to ensure that the vacuum system has sufficient vacuum.

6. The transmission chain should be checked once a week and an appropriate amount of grease should be added. If necessary, tighten again. When the chain is too loose and needs to be tightened again, the tensioner should be moved to adjust, but the chain cannot be opened or the chain cannot be 

separated from the sprocket, so as not to destroy the movement sequence of the whole mechanism and prevent the movement of the mechanism from being disturbed.

Feature of Capsule Filling Machine

1. The automatic hard capsule filling equipment with intermittent action and hole-disc filling is fully enclosed at the filling and turning parts, which is convenient for cleaning;

2. The upper and lower modules of the capsule filling machine move in one direction, and the imported double-lip polyurethane sealing ring has good sealing performance;

3. The module cleaning station of the capsule filling machine is combined with air blowing and inhalation, and the die hole is operated at high speed without dust;

4. The locking station of the capsule filling machine is equipped with powder suction equipment;

5. The capsule filling station of the capsule filling machine is equipped with a capsule ring, and there is no dust flying.

Products Show of Capsule Filling Machine

Detailed Parameters of Capsule Filling Machine

Application of Capsule Filling Machine

Hot Tags: herbal capsule filling machine, China, manufacturers, customized, wholesale, price, cheap, discount, small attention capsule filling machine, auto capsule filling machine, low cost capsule filling machine, breathing capsule filling machine, herb capsule filling machine, capsule filling automatic machine