Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of SED-2KJ-A Coffee Capsule Filling and Sealing Machine in China. Welcome to wholesale customized SED-2KJ-A Coffee Capsule Filling and Sealing Machine at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-2KJ-A is an automatic coffee-capsule filling and sealing machine. It combines empty-cup loading, screw-based ground-coffee dosing, pre-cut-lid placement, heat sealing and finished-cup discharge in one production sequence. The specified filling range is 2–20 g, with a stated packing speed of 2,000–2,200 cups per hour. Actual output depends on the cup and lid format, fill setting and production conditions.
Start machine selection with the actual capsule shell, pre-cut lid and coffee dose. The quoted 2,000–2,200 cups per hour speed is a machine rating, so trials should use the chosen cup geometry and ground coffee. The 2–20 g filling range covers different dose targets, but the screw setting, powder behavior and seal conditions must be checked together for a usable finished capsule.
Cup loading and coffee dosing
Empty cups are loaded to the indexed panel and moved to the filling station. The screw-filling system meters coffee powder; its target weight can be set on the touch screen. The machine can be configured for coffee-capsule formats such as Nespresso and K-cup with suitable tooling. Compatibility should be confirmed against the actual cup and lid dimensions.
The cup-loading station accepts a supply of empty cups and places them into mold positions on the indexed panel. This panel carries each cup into the dosing area. Coffee is metered by the screw system, with the intended fill weight set through the touch screen. For a change of capsule format, the cup mold and lid placement should be matched to the package instead of treating all capsules as interchangeable.
Lid placement and sealing
After filling, the machine places a pre-cut lid over the cup and heat seals it before discharge. The sealing station includes nitrogen flushing, temperature control, sensors, heat-sealing plates and pneumatic sealing devices. Seal performance must be checked with the selected lid film, cup material and product. The machine's control system uses a PLC and touch screen, with an emergency-stop device in the electrical protection circuit.
The lid-loading device is specified to position pre-cut covers automatically. The sealing assembly combines heating, thermostat controls, temperature sensors, heat-sealing plates and pneumatic devices, with nitrogen flushing included in the process. Those components support a coordinated sequence from dosing to cup discharge. The correct settings depend on the selected cup and lid materials, so production trials should inspect the finished seal and dose together.
Machine construction and services
The machine has an SS201 body, SS304 product-contact parts and aluminum molds. Overall dimensions are 120 × 120 × 180 cm, with an approximate machine weight of 500 kg. Electrical power is 3.5 kW, with a listed 220/380 V supply and an air source of 0.5–0.75 MPa. Confirm the cup tooling, utilities and installed layout for the intended packaging line.
The stated overall dimensions describe the machine itself. Allow additional access for cup supply, finished-capsule removal and service when laying out the line. Material choice differs by part: SS304 is specified where the product contacts the equipment, while SS201 is used for the outer body and aluminum for molds. Confirm the available voltage and compressed-air pressure against the stated utility requirements before installation.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-2KJ-A |
| Machine type | Coffee-capsule filling and sealing machine |
| Packing speed | 2,000–2,200 cups/hour |
| Filling range | 2–20 g |
| Electrical supply | 220/380 V |
| Machine power | 3.5 kW |
| Air source | 0.5–0.75 MPa |
| Overall dimensions | 120 × 120 × 180 cm |
| Machine weight | about 500 kg |
| Product-contact parts | SS304 stainless steel |
| Machine body | SS201 stainless steel |
| Molds | aluminum |
Features
- Automatic cup loading and indexed transfer
- Screw metering of ground coffee with touch-screen weight setting
- Automatic pre-cut-lid placement
- Nitrogen flushing and heat sealing
- PLC control and emergency-stop device
Hot Tags: SED-2KJ-A Coffee Capsule Filling and Sealing Machine, China, manufacturers, customized, wholesale, price, cheap, discount, manual capsule filling machine, capsule filling machine size, manual filling machine capsule, capsule manual filling machine, koffie machine capsule filling, lab small capsule filling machine


