SED-260YJ-C Automatic Hard Capsule Liquid Filling Machine

SED-260YJ-C Automatic Hard Capsule Liquid Filling Machine

The SED-260YJ-C is an automatic hard-capsule liquid filling machine rated at up to 260 capsules per minute. It supports sizes 00#–5# and safety capsule types A–E, with PLC control, variable-frequency speed adjustment, and SUS304/SUS316L product-contact parts.
Send Inquiry
Chat Now
Description

Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of SED-260YJ-C Automatic Hard Capsule Liquid Filling Machine in China. Welcome to wholesale customized SED-260YJ-C Automatic Hard Capsule Liquid Filling Machine at competitive price from our factory. Contact us for cheap products and discount information.

 

Products Description

The SED-260YJ-C is an automatic machine for filling liquid products into hard capsules. Its maximum specified capacity is 260 capsules per minute, with capsule sizes 00#–5# and safety capsule types A–E. Production results depend on the capsule, the liquid's flow characteristics and the selected operating conditions.

To compare this machine with a planned capsule line, define the capsule size, liquid flow characteristics and target fill weight before testing. The 260-capsule-per-minute figure is the maximum rated output, while the loading-rate and fill-deviation figures describe separate checkpoints. For fill weights at or below 300 mg, specify the acceptance range separately during a product trial.

Liquid filling and capsule handling

The capsule loading rate is specified at 99.5% or higher. For liquid fill weights above 300 mg, filling deviation is within ±3%. This conditional figure should be checked with the intended liquid and capsule. Product-contact parts use SUS304 and SUS316L stainless steel. The machine configuration includes an indexed drive, vacuum equipment and dust collection.

The capsule loading rate concerns how consistently capsules are presented to the machine. Filling deviation is specified only for liquid fills above 300 mg. Evaluate both figures with the intended formulation, capsule shell and production speed. This gives buyers a clearer basis for comparing line capacity without assuming that the nominal maximum speed applies to every liquid and capsule combination.

Drive, controls and utilities

A PLC and variable-frequency speed adjustment control the machine. The motor power is 5.75 kW and the electrical supply is AC 380 V, 50 Hz, three-phase four-wire. The specified compressed-air requirement is 0.06 m³/min at 0.3 MPa, with a vacuum range of −0.02 to −0.06 MPa. The listed working noise limit is 75 dBA. Confirm the actual utility arrangement during equipment selection.

Installation dimensions

The machine weighs 900 kg and measures 1,020 × 860 × 1,970 mm overall. The specified working environment is 21 ± 3 °C and 40–55% relative humidity. The installed configuration and surrounding access space should be checked against the production room and any upstream or downstream capsule equipment.

For site planning, the listed minimum factory height is 2.6 m with manual loading and 2.8 m with vacuum feeding. The listed exhaust volume is 300 m³/h. Check these dimensions and utility figures alongside the actual room supply, extraction and maintenance access. This supports a realistic installation plan, especially where ceiling height and capsule handling routes are constrained.

Products Specification

Parameter Specification
Model SED-260YJ-C
Machine type Automatic hard-capsule liquid filling machine
Maximum rated output 260 capsules/minute
Capsule sizes 00#–5# and safety capsule types A–E
Capsule loading rate ≥99.5%
Liquid filling deviation within ±3% for fills above 300 mg
Motor power 5.75 kW
Electrical supply AC 380 V, 50 Hz, three-phase four-wire
Compressed air 0.06 m³/min at 0.3 MPa
Vacuum range −0.02 to −0.06 MPa
Working noise ≤75 dBA
Machine weight 900 kg
Overall dimensions 1,020 × 860 × 1,970 mm
Product-contact parts SUS304 and SUS316L stainless steel
Control PLC and variable-frequency speed adjustment
Minimum factory height 2.6 m with manual loading; 2.8 m with vacuum feeding
Exhaust volume 300 m³/h

Features

  • Automatic liquid filling of hard capsules
  • Supports sizes 00#–5# and safety capsule types A–E
  • PLC control with variable-frequency speed adjustment
  • SUS304 and SUS316L product-contact parts
  • Vacuum equipment and dust collection in the machine configuration

Hot Tags: SED-260YJ-C Automatic Hard Capsule Liquid Filling Machine, China, manufacturers, customized, wholesale, price, cheap, discount, semi auto capsule filling machine, manual capsule filling filler machine, counting machines, capsule counting and filling machine, soft capsule filling machine, capsule filling machine australia