Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of Bottle Induction Foil Sealing Machine in China. Welcome to wholesale customized Bottle Induction Foil Sealing Machine at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-110LF-B is an electromagnetic induction foil sealing machine for bottle packaging. It uses a non-contact heating process to bond a compatible composite liner to the bottle mouth. Prepared bottles pass beneath the induction head during continuous sealing. The equipment is intended for the foil-sealing stage, after the liner has been fitted and the bottle cap has been tightened.
The sealing principle relies on heat generated in the aluminum layer by a high-frequency electromagnetic field. This heat melts the adhesive film beneath the foil so that it bonds to the bottle mouth. The foil and its bonding layer must be matched to the container material. Suitable container materials and the documented liner requirements are listed in the specification table.
The induction head is mounted on an adjustable vertical column above a freestanding support frame. The handwheel and locking handle allow its position to be set for the bottle path, while the column scale provides a visible reference. Flexible connections link the head and the electrical enclosure. The support base carries the assembly and allows it to be positioned at the sealing location.
The heating components use forced-air cooling. The electrical section includes indicators for observing the supply and induction operating condition, helping the operator assess whether the machine is working within its intended settings. The documented conveying control uses electronic stepless speed adjustment so the process speed can be adjusted during setup.
Before continuous operation, establish the sealing settings with the actual bottle, cap and liner. Adjust the head position and the container guides so that the bottle closure passes beneath the center of the induction head without obstruction. The head clearance and conveying setting are selected through a trial rather than assumed from the bottle appearance. After a trial bottle leaves the sealing area, remove its cap and inspect the bonded liner.
Once a suitable seal has been obtained, record the settings and prevent unintended changes during normal production. Continue checking the sealing result while the machine is running. A change in the container or sealing material can require a different process setting, so the reference throughput in the specification table should be understood together with its stated test-container conditions.
The equipment includes protection against excessive sealing current and excessive component temperature, with an operating-condition indication. The overtemperature function stops operation when the main circuit is too hot. These functions support equipment operation; they do not replace inspection of the finished seals. Follow the documented shutdown sequence and establish the required operating condition again before restarting production.
Install the machine on a stable, level surface in a clean, dry and ventilated location, away from heat sources and corrosive surroundings. Maintain reliable grounding and keep liquids out of the instrument switches and electrical controls. The moving and transmission parts require appropriate maintenance, and the induction head and electrical enclosure should only be opened by trained personnel.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-110LF-B |
| Input supply | AC 220 V ±10%; 50/60 Hz |
| Input current | <10 A |
| Output current | Static: <2 A; dynamic: <10 A |
| Operating frequency | 75–85 kHz |
| Enclosure protection rating | IP21 |
| Sealing diameter | 20–120 mm |
| Listed sealing-line speed | 0–20 m/minute; varies with container size and material |
| Reference throughput under stated test conditions | Approximately 280 bottles/minute; flat-cap PE bottle with Ø35 mm mouth and Ø38 mm body |
| Enclosure material | 304 stainless steel |
| Machine net weight | 43 kg |
| Weight after wooden-case packing | 86 kg |
| Suitable container materials | Plastic, glass and paper containers; unsuitable for metal or other conductive containers |
| Foil-liner requirement | Rolled aluminum foil composite liner, 0.015–0.03 mm foil thickness; compatible with the container material; vacuum-deposited composite foil is unsuitable |
Features
- Non-contact induction heating of the composite foil liner.
- Height-adjustable induction head on a freestanding support assembly.
- Forced-air cooling of the heating components.
- Electronic stepless adjustment of the conveying setting.
- Electrical operating-condition indicators.
- Overcurrent and overtemperature protection functions.
Hot Tags: Bottle Induction Foil Sealing Machine, China, manufacturers, customized, wholesale, price, cheap, discount, Aluminum Foil Container Aluminum Foil Sealing Machine


