Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of vibration fluidized bed dryer customizable in China. Welcome to wholesale customized vibration fluidized bed dryer customizable at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-200ZGF-L combines a horizontal vibrating bed with an air supply and exhaust system. It is used to dry suitable crystalline and granular materials as they travel through the chamber. Feed enters at one end, passes through the bed and leaves at the discharge. The enclosed body directs the process air through the material while keeping the feed path separate from the exhaust outlet.
Preparing the air and moving the feed
The supply fan takes incoming air through the filter and heater before delivering it to the lower chamber. The air then rises through the perforated plate into the product layer. At the same time, the vibration drive moves the particles along the bed. This contact with the heated stream transfers heat to the material and carries away the moisture it releases.
The layer depth and the way the product advances through the chamber affect its contact with the air. Vibration settings provide a way to adjust product movement when setting up the dryer for a particular material. The operating conditions should be established for the feed properties and the finished condition required.
Extracting moist air and recovering particles
The exhaust fan draws moist air from the upper chamber. Before the air is discharged, it passes through the cyclone, where entrained particles are separated from the stream. A collection container and butterfly valve are provided for handling recovered material. The main product continues through the bed and leaves through its own discharge opening.
Access to the chamber
The bed body is supported on vibration-isolating elements. Insulation around the lower section helps reduce heat loss from the air chamber. The upper and lower sections can be separated to reach the fluidizing plate, and cleaning and observation openings provide access to the interior. Operators can inspect these surfaces when preparing the machine for another run.
The control cabinet and temperature instruments accompany the bed drive and air-handling equipment. They provide the operating controls for the drying assembly. The parameter table identifies the documented construction, heating and fan arrangement for this configuration.
The listed material example is a corn-drying application. Its throughput is tied to the stated incoming and final moisture conditions. It should be evaluated as an application reference when setting up other products, alongside their granule size, moisture content and behavior in the bed.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-200ZGF-L |
| Equipment type | Vibrating fluidized-bed dryer |
| Reference material | Corn |
| Reference corn output | 100–200 kg/h for the stated corn-drying application |
| Reference initial and final moisture | Approximately 35% initial moisture to approximately 15% final moisture |
| Heating arrangement | Electric heating group |
| Electric-heater power | 108 kW |
| Drive and fan installed power | 11.5 kW; electric heating is listed separately |
| Electrical supply | To be confirmed for the supplied configuration |
| Vibration drive | 2 motors, 1.5 kW each |
| Supply-fan power | 3 kW |
| Supply-fan airflow | 2664–5268 m³/h |
| Induced-draft-fan power | 5.5 kW |
| Induced-draft-fan airflow | 4012–7419 m³/h |
| Material-contact construction | 304 stainless steel |
| Outer enclosure panels | Q235 steel with high-temperature-resistant protective coating |
| Lower-chamber insulation | 50 mm aluminum-silicate insulation |
| Bed plate | Double-layer 304 stainless steel; 3 mm holes |
| Air filtration | 2 m² filtration area; nonwoven filter medium |
| Dust recovery | Cyclone separator with a butterfly valve and collection container |
Features
- A horizontal vibrating bed advances the material through the drying chamber.
- Filtered heated air passes through the perforated plate and the moving product layer.
- The exhaust cyclone and collection container recover particles carried by the air.
- The bed body can be opened to reach the fluidizing plate.
- Observation and cleaning openings provide access to the chamber.
Hot Tags: Vibration Fluidized bed dryer Customizable, China, manufacturers, customized, wholesale, price, cheap, discount, Fluid Bed Dryer Granulator, Fluidized Bed Spray Dryer, Fluid Bed Dryer Manufacturer, High Performance Vertical Desiccated Coconut Fluid Bed Dryer


