SED-60GF-H Steam-Heated Fluid Bed Dryer

SED-60GF-H Steam-Heated Fluid Bed Dryer

The SED-60GF-H dries granules and powders in 60 kg batches using filtered air, steam heating and stirred negative-pressure fluidization. A removable material hopper and antistatic filter bags support batch handling and routine cleaning.
Send Inquiry
Chat Now
Description

Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of SED-60GF-H Steam-Heated Fluid Bed Dryer in China. Welcome to wholesale customized SED-60GF-H Steam-Heated Fluid Bed Dryer at competitive price from our factory. Contact us for cheap products and discount information.

 

Products Description

The SED-60GF-H is a batch fluid bed dryer for granules and powders in pharmaceutical, food, feed and chemical processing. The listed batch charge is 60 kg. Drying takes place in a removable charging hopper, with filtered and heated air passing through the material.

Airflow and Batch Handling

The process combines airflow, stirring and negative-pressure fluidization. Air passes through the distribution screen and contacts the wet feed. The agitating assembly works with the fluidizing air to limit material blocking. Loading and drying conditions need to be matched to the particular material.

The material hopper is taken out after the drying operation for unloading. The handling and tipping arrangement should be specified for the installation. The operating sequence covers hopper positioning, flange sealing, temperature setting, drying and removal of the hopper.

Filtration and Sealing

The inlet-air arrangement includes a wire-mesh primary filter and a frame-type finer filter. Steam heating is included in the described heat system. The filtering and heating sections are considered together with the fan, air passages and process connections when planning the installation.

Antistatic filter bags retain fine powder from the exhaust stream. Pneumatic shaking can return retained fines to the container after fluidization. The bag-separation chamber has a circular structure, and the upper and lower hopper flanges use an inflatable seal.

Products Specification

The following figures are reference data for the SED-60GF-H column. The listed operating time depends on the material; final loading, cycle conditions and utilities need confirmation for the project.

Parameter

Specification

Model

SED-60GF-H

Listed batch charge

60 kg/batch

Blower airflow

2361 m³/h

Blower air pressure

494 mmH₂O

Blower power

7.5 kW

Agitating speed

11 rpm

Listed steam consumption

141 kg/h

Listed operating time

Approx. 15–30 min, depending on the material

Listed operating temperature

Approx. 120°C, controllable

Height, round configuration

2700 mm

The blower power is a component rating. The electrical supply, total connected load and utility arrangements need to be established for the ordered system. The height value applies to the round configuration listed in the parameter table.

Features

Cylinder Construction and Pneumatics

The upper cylinder, barrel body and lower cylinder are specified as 3 mm SUS304. The punching plate is specified separately as 2.5 mm SUS304. These material and thickness descriptions apply to the identified components; the support structure and other assemblies have their own specifications.

Pneumatic devices provide the lifting and bag-shaking functions. The lift cylinder brings the upper and lower flanges into their sealed position before the drying operation. The flange seals, compressed-air lines and filter bags are parts that require inspection during service.

Installation and Routine Care

The installation needs access behind the dryer for checking and sufficient space at the front for operation and hopper handling. The fan arrangement and the power, steam and compressed-air connections should be planned as part of the site layout.

The filter bag and barrel need cleaning after operation. Keeping the bag clear supports the intended air volume and pressure, while cleaning the barrel limits residual material carried into the next batch. Inspection and replacement intervals should reflect the material and operating duty.

Equipment reference views. Confirm the tipping equipment and overall system configuration for the project.

Hot Tags: SED-60GF-H Steam-Heated Fluid Bed Dryer, China, manufacturers, customized, wholesale, price, cheap, discount, Fluid Bed Dryer Granulator, Fluid Bed Dryer Manufacturer, Fluidized Bed Spray Dryer, High Performance Vertical Desiccated Coconut Fluid Bed Dryer