Spray Dryer For Fruit Powder

Spray Dryer For Fruit Powder

The SED-3PG-Q is a compact centrifugal spray dryer for evaluating liquid food formulations. It lets operators compare how changes to a prepared feed affect the powder recovered after drying.
Send Inquiry
Chat Now
Description

Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of spray dryer for fruit powder in China. Welcome to wholesale customized spray dryer for fruit powder at competitive price from our factory. Contact us for cheap products and discount information.

 

Products Description

The SED-3PG-Q is a compact centrifugal spray dryer for evaluating liquid formulations before committing to a production process. For fruit powder development, each trial begins with a prepared liquid formulation. The aim is to check whether it can pass through the feed system, form droplets at the spray head and produce a powder that can be collected and evaluated.

Preparing a formulation for a run

The feed should pass through the filter and the peristaltic pump consistently. If the feed does not reach the spray head evenly, changes in the resulting powder are harder to attribute to the drying settings. The model documentation lists carbohydrates and dairy products among the applications. Fruit formulations should be evaluated individually because the solids content and behavior of the feed can vary.

Following the run at the machine

The control panel sits next to the chamber, with a round observation window in the front of the dryer. The operator can follow the air temperature readings on the touchscreen while observing the spray chamber. Air entering from above travels with the spray so the droplets are exposed to heat while moisture is evaporating. The centrifugal disc breaks up the liquid without a second atomizing air stream at the spray head.

Reviewing the powder

Powder can settle at the bottom of the chamber or leave with the air and be recovered at the cyclone. When evaluating a formulation, inspect the powder from the collection points before changing a setting for the next run. Particle size, bulk density and remaining moisture can each affect whether a powder suits its intended use.

Record the feed formulation, operating settings and observed results together. Comparing runs is easier when the feed preparation and test method are consistent. The amount of powder recovered depends on how much solid material enters with the liquid and where that material is collected. The water evaporation and pump ratings in the table describe different parts of the process.

Products Specification
Parameter Specification
Model SED-3PG-Q
Atomization Electrically driven centrifugal disc
Airflow Co-current
Maximum water evaporation 3 kg/h
Listed peristaltic pump rating 3 L/h
Inlet air temperature range 50 to 300 °C
Outlet air temperature range 30 to 150 °C
Atomizer speed 10,000 to 36,000 rpm
Atomizer disc diameter 52 mm
Heat source Electric
Maximum heater power 6 kW
Total power 7 kW
Supply voltage 220 V
Overall dimensions (L × W × H) 1100 × 950 × 1600 mm
Drying tower, atomizer and cyclone material 304 stainless steel
Powder collection vessel volume 3 L
Controls PLC with 7-inch touchscreen
Inlet and outlet temperature probes PT100
Features
  • A front observation window gives the operator a view into the chamber.
  • The feed filter and peristaltic pump are installed upstream of the rotating spray disc.
  • The operator can follow both air temperature readings on the touchscreen.
  • The drying chamber and side cyclone provide distinct powder collection points.

Hot Tags: Spray Dryer For Fruit Powder, China, manufacturers, customized, wholesale, price, cheap, discount, Mini Spray Dryer, Spray Dryer Machine, Industrial Spray Dryer, Small Spray Dryer, Spray Dryer