The rotary automatic tablet press can be widely used in various scientific research institutes, enterprise R&D departments, small pharmaceutical factories, health care products factories and other types of customers. The tablet press conforms to the GMP standard.

The tablet chamber is completely separated from the transmission mechanism. The parts in contact with the medicine are made of stainless steel or have special surface treatment, which is non-toxic and corrosion-resistant.
The tablet chamber is closed with transparent plexiglass to prevent pollution. Smooth surfaces everywhere for easy handling.
1.The tablet press can use a copper wire brush to throw off the adherents on the punch, and then use a flannel to stick a little abrasive paste to polish the surface of the tablet. Do not throw with a wire brush, otherwise it is easy to scratch the surface of the sheet;
2. If the adhesion is too hard to be removed directly, soak the punch in hot water for a few minutes, then the adhesion can be easily removed, and the water can be wiped off in time to prevent rust;
3. If there is no lathe at the user's place, buy a die polishing machine from the market, and the price is not expensive;
4. In addition, we should also analyze the reasons from the aspect of pharmaceutical materials, whether the release agent (lubricant) is added less, and an appropriate amount (5-10%) of magnesium stearate lubricant can be added.
The tablet press punch is an important part of the tablet press, also known as the tablet press die in the industry. A pair of tablet press punches are divided into three parts: upper punch, middle punch and lower punch. The manufactured punches are round, special, rotary, single, etc., in terms of material, heat treatment, grinding, polishing, etc.
The rotary automatic tablet press is used to press various granular raw materials into round tablets, which are suitable for laboratory trial production or small batch production of various tablets, sugar tablets, calcium tablets, etc.
It is a small desktop electric (manual) continuous tableting machine. A pair of punching dies is installed on the machine. The filling depth of the material and the thickness of the tableting can be adjusted.

