Analysis of the causes and solutions of empty capsules in semi-automatic capsule filling machines
There are many reasons for the empty capsules in the capsule filling machine, including the hardness of the processed particles is too hard, and the gap between the copper plates is too large. Then, once this phenomenon occurs, what should we do? Xiaobian for everyone Explain the reasons and solutions for this phenomenon, as follows:
Why does the semi-automatic capsule filling machine produce empty capsules?
1. What we need to consider is whether there are particles. If there are too many particles or their hardness is too hard, the mobility of the capsule will be poor, resulting in the phenomenon of empty capsules.
2. Considering the reason of the counter, if the counter is too thin, it will also affect the filling amount and cause the phenomenon of empty pockets.
3. Consider whether the gap between the copper plate and the metering plate is too large. If it is too large, the powder will remain on the machine table, resulting in the phenomenon of empty pockets.
4. What also needs to be considered is the problem of the punch and whether its viscosity is too large. If it is too large, the phenomenon of empty pockets will appear during the machining process.
What should I do if the semi-automatic capsule filling machine has empty capsules:
1. If the phenomenon of empty pockets occurs, we need to carry out maintenance in strict accordance with the product's technological process and automated operation standards, and the maintenance problem occurs in that link.
2. If a hopper is added to the empty bag, it is necessary to set its detailed value, and dial a specific point on the value to perform bag seeding processing.
3. We need to fill the cover of the upper template into the lower template, and carry out the transfer lock processing, and firmly do the locking feature, and the capsule can flow into the accurate position.