How does the height round bottle labeling machine work? The working principle of the highly round bottle labeling machine is actually not complicated. The bottles are sent to the chain plate by the upper assembly line.
The bottles are arranged at equal distances through the distance adjustment device and enter the photoelectric sensing area.
The reel controlled by the stepping motor After the labeling paper receives the signal, it will automatically send the label, and the automatically peeled labeling paper will be correctly attached to the bottle.
Another group of photoelectric sensors can limit the delivery of the last label paper in time. In the continuous bottle feeding process, the label paper is correctly attached to the bottle one by one, and after being flattened by the roller, it is automatically output to complete the entire labeling process.
From the above-mentioned principle of the high round bottle labeling machine, we can see that the round bottle labeling machine can greatly save the manpower and material resources of the factory assembly line, and the factory can save this part and use it for other purposes.
Customized and customized automatic machinery and equipment according to the process requirements of enterprise users. It is easy to operate, flexible and not single. The functions can be added according to the requirements of users.
The height round bottle labeling machine is a labeling machine suitable for labeling PET bottles, plastic bottles, glass bottles, metal bottles and other round bottles. It is easy to operate.
Above, we will introduce the detailed operation method of the height round bottle labeling machine in detail.
1. The labeling position of the highly round bottle labeling machine does not fluctuate
1. The installation of the pressure belt may not be pressed tightly, which will lead to the loosening of the standard belt and the inaccurate detection of the electric eye. Squeeze label handling.
2. The traction mechanism may slip or it may not be compressed, so that the bottom paper cannot be taken away smoothly. Tighten the traction mechanism to deal with it. If it is too tight, the label will be distorted. It is better to be able to pull the backing paper normally. (Usually if the bottom paper is wrinkled when pulled out, it should be pressed too tightly)
3. The shape of the object to be pasted is different or the positioning is different. Control product quality.
4. The object to be attached should be placed in parallel with the direction of the label (pay attention to whether the product can move during the labeling process, and the support rod on the right can be appropriately advanced than the left)
5. The object to be attached should rotate smoothly on the labeling station (be careful not to touch the peeling plate). When the object is too light, put the cover down and press the object to be attached.
6. In the double-label mode, the single label is issued (1) After the single label is issued, the workpiece keeps rotating, because the delay of the second label is not set, and the machine is in the state of waiting for the labeling signal of the second label. (2) After a single label is issued, the workpiece is stopped. It is because there is signal disturbance in the target measuring electric eye (reset the electric eye) or the delay control is abnormal (after clicking jog 2 twice, click jog 1 twice again)
2. The labeling of the high round bottle labeling machine is skewed
1. The pressure belt is installed too tightly, resulting in the deviation of the standard belt, and the pressure of the pressure belt can be increased.
2. The tape correction is not stopped before the automatic operation is stopped, and the correction can be stopped again.
3. The labeling quality of the highly round bottle labeling machine is not good, with bubbles or wrinkles
1. If the labeling is not complete, the speed of labeling can be reduced.
2. It may be a transparent label, or the label may be too soft.
3. Improper adjustment of the gravity of the overlay, it is important to adjust the force of the overlay.
4. There are wrinkles at the beginning of the labeling, which may be because the label is too soft, and the label has been bent when it is extended, and the position of the stripping plate is raised as close to the product as possible.
5. The front and rear of the label are not aligned. Adjust the inclination of the support rod so that the product can be perpendicular to the extension direction of the label. Adjust the inclination of the support rod 2 through two screws 1 and 3 to correct the head-to-tail handover error of the label.
6. The product moves in another direction during the labeling process of the height round bottle labeling machine, and slightly raises the support seat on the right side of the support rod.