The residual limit is allowed to meet the process requirements by means of wiping, sampling and analysis. Equipment maintenance and overhaul Maintenance and overhaul interval Maintenance and overhaul category Maintenance and overhaul are divided into four categories: minor repair, medium repair, major repair and maintenance.
PTMq+Maintenance and overhaul interval Maintenance and overhaul category Minor repair Medium repair Overhaul Maintenance and overhaul interval Maintenance and overhaul contents Remove the oil stain on the drive chain, sprocket, cam, bearing and roller, and add lubricating oil (grease). Check the berthing capacity of the main drive reducer and the feeding reducer.
If the berthing capacity is insufficient, add berthing in time. Check and adjust the tightness of the drive chain, and clean the filter screen of the filter. Clean the powder on the rotary table and parts. Check the electrical control system, replace the components with hidden dangers, remove the dust and check whether the connectors are loose and fastened. Medium maintenance includes minor maintenance. Remove the cam of the rotary table, remove the mooring dirt, check the cam contour, and apply grease.
Check the bearings installed on the sliding frame, replace the loose and worn bearings, and check, repair or empty the capsule sorting mechanism. Check and repair capsule delivery mechanism, and replace damaged bearings and parts. Easy inspection and repair. Waste mechanism, pressing mechanism and finished product pushing mechanism, replace worn bearings and the whole machine. Check and repair the powder feeding mechanism, and replace the damaged parts.
Replace the lubricating oil in the reducer and the lubricating oil in the indexing box. Check and repair the filling rod and retainer of the metering device, and replace the invalid retainer spring. Check and replace the worn metering template of metering hole. Check, repair or replace the damaged seal guide.
Check and clean the drive chain, sprocket and gear, and repair or replace the damaged parts. Check and clean the cam contour, swing rod, connecting rod bearing and spring, and replace the damaged parts. Check and repair the main drive reduction mechanism, and replace the damaged parts. Check and repair vacuum pump, pipeline and other accessories, replace damaged parts,

