How To Improve The Accuracy And Stability Of The Counting Machine

Sep 09, 2022

Leave a message

How to improve the accuracy and stability of the counting machine?


First, this must be determined by specific statistics. What the numbers bring is more intuitive. Second, numbers alone are not enough. It is also necessary to continuously record and test the accuracy of the number of particles, and conduct reasonable statistics and analysis of data sources.


1.The technician should preheat the machine before starting it according to the operation steps. Or during the operation of the machine, the technicians need to replenish the materials in the silo in time.

If this is not done, it will affect the separation state of the materials on the vibrating plate. All of these external factors will result in incorrect product counts.


2. The three-stage oscillating plate used to produce capsules, tablets and pills in the tablet counting machine is set to a completely different oscillation frequency. 

Or when making tablets and capsules, since the material contains dust, the accumulation of dust in the detection channel will block the infrared rays, so the counting circuit cannot work properly.


3. The quality of compressed air will affect the accuracy of counting. Compressed air with high water content has a great influence on the sensitivity of the actuator cylinder. Once the sensitivity of the cylinder is reduced, the accuracy of the count cannot be guaranteed.


4. The accuracy of the capsule counting machine is affected by the setting of the silo door, the setting of the oscillation frequency of the three-stage vibrating plate, the setting of the product length and parameters, the setting of the predicted value, the setting of the counting speed and the speed. Separation speed setting.


5. As the actuator of the tablet counting machine, its response speed directly affects the accuracy of counting. The reasons for the reduced sensitivity of the cylinder are: moisture in the compressed air, non-cylinder grease, impurities entering the cylinder, and cylinder leaks and leaking seals.