After we purchase the labeling machine, the maintenance of the automatic flat labeling machine is also a concern of many customers, because once the machine fails, it will affect the production of all aspects of the product, resulting in a decline in the quality and output of the product. Such a problem is the need for We usually pay more attention.
Standard operation, but also reasonable maintenance of the labeling machine to avoid machine failure, we will make the machine run normally for a long time, it will not affect the production task of the machine and the quality of the product.
1. Regular cleaning and lubrication
During the use of the automatic flat labeling machine, dust will inevitably accumulate. It is the correct choice to turn off the power supply regularly for cleaning, and it can also be covered with a dust-proof cloth.
Especially equipment that has not been used for a long time should be maintained in this way. This ensures that the performance of the device is not affected and that its high-quality operation is guaranteed.
After using for a period of time, lubricating oil can be applied to ensure that the equipment will not rust and cause wear, which can effectively prolong the service life of the equipment.
2. Adjust the parts
The labeling machine mainly adjusts the bottle star wheel and the bottle feeding screw, and mainly adjusts its position and screw. The goal is to keep it close to the bottle, but not move during operation. In this way, the standard loss rate and the standard error rate of the equipment can be guaranteed.
3. Adjust the label box
Adjusting the label box is critical, pay extra attention to the box centerline to ensure it is not skewed. The gap between the label box and the bead should not exceed 1 cm as much as possible.
If the gap is too large, the label paper will be easily displaced. If the gap is too small, it will be affected to a certain extent when pushing the label.
At the same time, pay attention to the adjustment of the label supply roller to ensure that the label is not crushed. If the label is pressed, it is easy to cause material loss, which will bring huge losses to the enterprise.
The automatic plane labeling machine is not used for a long time, or it needs special repair and maintenance, so as not to affect the use time and production efficiency of the equipment.