How to operate
1. Press the green button in the "power switch" to turn on the power.
2. Slowly adjust the "vibration intensity adjustment knob" and rotate it clockwise. At this time, the sorting tray integrated with the "vibration bracket" starts to vibrate. Touch the sorting tray with your hand and adjust to a certain vibration intensity by feeling.
3. Put the powder capsule shell into the "Powder Capsule Shell Arrangement Tray", and put about 300 capsules each time. Put the capsule caps into the "capsule cap sorting tray", about 300 capsules each time.
The sorting plate is made of plexiglass plate, and there are many round holes with large upper and lower small funnels drilled on it.
The diameter of the round holes corresponds to the diameter of the capsule number. At this time, the capsule shell of the vibrating table moves steadily forward and backward, so that the capsules enter the hole of the table one by one.
4. After about 30 seconds, the powder capsule shell and capsule cap will fall into the round hole with the opening facing upwards. If the individual openings are facing down, the capsule cap can be used to gently press down the sleeve, and then the sleeve can be pulled out.
5. Horizontal hand-held powder capsule shell connecting plate (not drawn at the end of the picture, has been prepared randomly, there are round holes in the connecting plate), after the whole
Gently push the lower part of the sorting tray inward, and the powder capsule shell in the sorting tray will drop down into the round hole of the connecting plate, and then take out the connecting plate. In the same way, remove the capsule cap with the capsule cap cover plate.
6. You can prepare a square plate of medicine powder with a bottom area of 500×500mm and a height of about 10mm on the four sides in advance. Then cover the random plexiglass frame on the powder capsule connection board, put the powder into the frame with a small bucket shovel, and scrape the frame with the edge to fill the powder, and scrape off the excess powder.
7. Use the randomly equipped capsule cap to cover the set board (not shown in the picture, the set board has round holes), put it on the capsule cap cover plate, there are alignment holes, it is easy to place. Flip the capsule cap cover plate so that the opening of the capsule faces down, and cover it on the powder capsule shell plate that has been filled with medicinal powder. There are also alignment holes, which are easy to fit.
8. The capsule filling machine puts the sleeved capsule board into the cavity below the "capsule cap forming board", and pulls the "pressing rod" down by hand to place it in place. There is no need to be careful about excessive force, because there is a positioning The mechanism controls the depression height. Take out the sleeved capsule board, pour out the capsule, and complete the filling. The next board can be cycled.
Application of capsule filling machine
Disclaimer: This article is only for exchange and learning, and the copyright belongs to the original author. Some articles cannot be contacted in time when they are pushed. If the source is incorrectly marked or infringes your rights, please let us know and we will delete it immediately, thank you!!!!