(1) The speed of the machine is limited by the speed of the lower instruction manual and the lowering plate, and the design should be more reasonable;
(2) The stability of the machine is relatively poor after long-term high-speed operation, requiring stable operation and more use of servo systems;
(3) The accuracy cannot meet the requirements after long-term operation, the synchronization is not good, and the reliability is required to be improved;
(4) The adaptability to the product is low, its function is relatively single, the adaptable surface is relatively narrow, and the shape of the medicine to be loaded is small.
There are stricter regulations on accumulation, etc.;
(5) The operation reliability of the equipment is not high, and frequent maintenance is required to affect the production progress;
(6) The production efficiency is not high, the running speed is slow, and the degree of automation is not high;
(7) The vertical cartoning machine is very sensitive to the dimensional deviation of the manual. For example, the dimensional deviation of the manual should be less than
±0.5 mm, in daily production, there will be a phenomenon of jamming due to the thin manual. Sometimes due to the size of the carton
A slight change has resulted in the phenomenon that the carton is not easy to be opened or jammed.