Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of 3d mixing machine in China. Welcome to wholesale customized 3d mixing machine at competitive price from our factory. Contact us for cheap products and discount information.
3d Mixing Machine
Product Overview of Mixing Machine
The 3D Motion Mixer is an efficient mixing machine for a wide variety of powders and granules with many different ingredients. The machine consists of a frame, a reducer, a motor, a transmission system, a multi-directional motion actuator, a material container and an electrical control system.
The driving shaft and the driven shaft parallel to the driving shaft are installed on the same horizontal plane of the frame. The driving shaft is connected with the transmission mechanism.
The outer ends of the driving shaft and the driven shaft are respectively connected with the U-shaped rotating arm through a universal joint, and the two ends of the U-shaped rotating arm are respectively connected with one end of the barrel through a bearing. When the spindle rotates.
Feature of of Mixing Machine
1. This multi-directional motion mixer consists of a base and a drive system. Electronic control system, multi-directional, kinematic mechanism and mixing tank. The mixing tank of this medicinal 3D mixer in contact with the material is made of high-quality stainless steel, and the inside and outside of the tank are mirror-polished.
2. Due to the multi-directional movement of the mixing tank of the three-dimensional powder mixer, there are many mixing points and good mixing effect. The uniformity of mixing is better than that of ordinary mixers.
3. The design of the tank body of the 3D mixer is reasonable, there is no dead angle, and the inside and outside are polished. The material is free to discharge, no accumulation, and easy to clean.
4. Perfect mixing efficiency.
5. The product mixing rate is as high as 99.9% or more. There is no dead space in the mixing tank.
6. The product will not cause segregation, stratification and accumulation due to the different densities of the components in the material.
7. Wide range of application. It allows for large differences in the densities of all components in the material.
8. There is very little residual material in the barrel, and the loss during processing is very small.
9. The mixer is easy to clean and can be done manually. If necessary, the water tank can be cleaned directly with a water gun.
Technical Parameters of Mixing Machine
Model | SYH 10 |
Barrel capacity(L) | 10 |
Max loading capacity(L) | 6 |
Speed of driving shaft(r/min) | 0-8 |
Motor power(kw) | 0.55 |
overall dimensions(mm) | 750x650x700 |
Total weight(kg) | 100 |
Product Show of Mixing Machine
Application of Mixing Machine
The barrel filling rate of the mobile multi-directional mixer is large. The maximum rate can reach 90% (ordinary mixer only has a charging rate of 40%), with high efficiency and short mixing time.






Hot Tags: 3d Mixing Machine, China, manufacturers, customized, wholesale, price, cheap, discount, Cosmetic Vacuum Homogeneous Emulsifying Machine, Two Dimensional Mixing Machine, Mixing Machine Powder, Vacuum Homogenizer Emulsifier Machine, Dry Powder Mixing Machine, Series High-Speed Mixer


