Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of fluid bed dryer for sale in China. Welcome to wholesale customized fluid bed dryer for sale at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-8-1.8ZGF-H dries material as it moves through a horizontal fluidized bed. It is intended for continuous handling of suitable particles in applications such as food, seed and chemical processing. Feed enters at one end and exits after it has travelled through the chamber. The vibration drive and the air flowing upward through the bed perform different parts of the drying process.
Feeding and moving material
The inlet delivers material to the first section of the perforated bed plate. The shaped openings there help the feed move into the chamber. Farther along the bed, another opening pattern allows process air to rise through the layer of material. The vibration drive moves the product along the horizontal path toward the discharge.
The depth of the material layer and the speed at which it advances affect how long it is exposed to the process air. Those conditions can be adjusted to suit the material. The operator can review the flow along the bed when setting up the dryer for a particular feed.
Process airflow and moisture removal
Incoming air passes through the inlet filter before it is heated and directed into the space below the perforated plate. As air rises through the openings, it lifts and separates the particles so their surfaces are exposed to the moving air. The air carries away moisture released by the material, while vibration continues to advance the product toward the outlet.
The exhaust system takes the moist air from the upper part of the chamber. A cyclone separates particles entrained in the outlet stream. Dried material leaves through the discharge at the end of the bed, allowing feed and discharge to take place during the same run.
Access between runs
Access ports allow operators to inspect the chamber. The connection between the upper and lower bed sections can be opened for cleaning. A separate cleaning opening provides access to the interior. These access points help the operator inspect the route the material follows before setting up another run.
The condition of the incoming particles affects the drying process. Product movement, the incoming air conditions and the desired outlet condition should be assessed for the material being handled. The evaporation potential listed in the parameter table refers to moisture removal. It is separate from the feed rate of the material.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-8-1.8ZGF-H |
| Operating mode | Continuous vibrating fluidized-bed drying |
| Drying bed dimensions (L × W) | 8000 × 1800 mm |
| Drying bed area | 14.4 m² |
| Listed evaporation potential | 290 to 420 kg/h |
| Typical inlet air temperature range in manual | 70 to 140 °C |
| Typical outlet air temperature range in manual | 40 to 70 °C |
| Overall dimensions (L × W × H) | 8520 × 3250 × 3100 mm |
| Listed equipment weight | 8600 kg |
| Heat exchanger | Steam radiator |
| Bed and perforated plate material | 304 stainless steel |
| Vibration drive | Two vibration motors |
| Outlet air separation | Cyclone separator |
Features
- A horizontal vibrating bed advances material from the inlet to the discharge.
- The feed section and the downstream section use different perforation patterns.
- Heated air rises through the bed while the material advances.
- A cyclone separates particles carried into the outlet air stream.
- The quick-opening connection and access ports provide access for inspection and cleaning.
Hot Tags: Fluid Bed Dryer For Sale, China, manufacturers, customized, wholesale, price, cheap, discount, Fluidized Bed Spray Dryer, Fluid Bed Dryer Granulator, Fluid Bed Dryer Manufacturer, High Performance Vertical Desiccated Coconut Fluid Bed Dryer