Hangzhou Shengde Machinery Co., Ltd. is one of the most professional manufacturers and suppliers of high pressure steam sterilizer in China. Welcome to wholesale customized high pressure steam sterilizer at competitive price from our factory. Contact us for cheap products and discount information.
Products Description
The SED-1000MM-U is a large pulsating vacuum pressure steam sterilizer with a listed chamber capacity of 1000 L. It is designed for heat- and moisture-resistant loads such as instruments, dressings, fabrics, glassware, and other compatible items. Its horizontal chamber, powered double doors, and programmable control system provide a practical basis for batch processing in pharmaceutical production, laboratories, and sterilization facilities.
Pulsating vacuum and steam processing
The machine combines repeated vacuum stages with steam admission to remove air from the chamber and support steam penetration into the load. The control description includes negative-pressure, cross-pressure, and positive-pressure pulsation modes. Pulse settings can be adjusted through the program, allowing the process configuration to be matched to the intended load. Vacuum drying and pulsating drying functions are also included for compatible programs.
The documented temperature setting range is 115–138°C. Program selection, holding time, pulse settings, and drying requirements must correspond to the items being processed and the established process specification. The equipment provides the controls needed to set and monitor these variables; it does not make every load suitable for the same cycle. This distinction is useful when reviewing a mixed workload before choosing an autoclave configuration.
A large horizontal chamber
The chamber dimensions are listed as 610 × 910 × 1820 mm, stated as width × height × length. Its internal shell is made from S30408 stainless steel, with a Q245R jacket and stainless steel external panels. The chamber floor slopes toward the drainage outlet to support condensate removal and cleaning. Thermal insulation surrounds the chamber assembly to limit heat transfer to the outside of the machine.
The overall dimensions are 1440 × 1950 × 2370 mm in the same width × height × length order, and the listed net weight is 1580 kg. These measurements should be considered together with access for loading, unloading, maintenance, and utility connections. The documentation also describes movable casters for positioning the equipment during installation.
Powered doors and controlled access
The specified configuration uses powered doors on the loading and unloading sides, with pneumatic sealing. The double-door interlock prevents one door from operating while the other is not closed. Pressure-related interlocks prevent the chamber door from opening when the chamber is under positive or negative pressure. Door-position checks are also part of the operating sequence, helping control access to the chamber during processing.
The control system monitors door status, chamber conditions, sensors, and the progress of the selected program. Documented alarms cover abnormal temperature, pressure, door movement, vacuum leakage, and process timeouts. Maintenance prompts support routine attention to door seals, filters, and moving mechanisms. These functions give operators information about conditions that need attention during operation and service.
Touchscreen operation and traceable records
A PLC controls the machine, with 10-inch color touchscreens specified at both the front and rear doors. The interface displays the active process and its temperature, pressure, and time values. User permissions support different operating responsibilities. A built-in printer records cycle details, including the operator, selected program, settings, process values, and alarm information, so the completed run can be reviewed and documented.
The listed electrical supply is AC 380 V, 50 Hz. The technical configuration specifies 3.5 kW for the machine and a 60 kW steam generator; the final steam-supply arrangement should be confirmed for the installation. The piping system includes a water-ring vacuum pump, heat exchanger, control valves, and stainless steel connections. Before specifying the SED-1000MM-U, provide the intended load types, batch arrangement, available utilities, and site dimensions so the selected configuration can be checked against the application.
Products Specification
| Parameter | Specification |
|---|---|
| Model | SED-1000MM-U |
| Equipment type | Pulsating vacuum pressure steam sterilizer |
| Nominal chamber capacity | 1000 L |
| Chamber dimensions (W × H × L) | 610 × 910 × 1820 mm |
| Overall dimensions (W × H × L) | 1440 × 1950 × 2370 mm |
| Net weight | 1580 kg |
| Chamber design pressure | −0.1 to 0.3 MPa |
| Programmable temperature range | 115–138°C |
| Electrical supply | AC 380 V, 50 Hz |
| Machine power | 3.5 kW |
| Steam-generator power, listed configuration | 60 kW |
| Chamber material | S30408 stainless steel |
| Jacket material | Q245R |
| Doors | Double powered doors with pneumatic seals and interlocks |
| Control system | PLC with front and rear 10-inch color touchscreens |
| Cycle recording | Built-in printer |
| Drying functions | Vacuum drying and pulsating drying |
Features
- 1000 L nominal chamber capacity for batch processing of compatible heat- and moisture-resistant loads.
- Programmable pulsating vacuum operation with steam admission and drying functions.
- Powered double doors with door-position checks and pressure-related interlocks.
- Front and rear 10-inch touchscreens for process monitoring and program operation.
- Printed cycle records with operator, program, temperature, pressure, time, and alarm information.
- Stainless steel chamber construction with a sloped drainage surface.
Hot Tags: high pressure steam sterilizer, China, manufacturers, customized, wholesale, price, cheap, discount, Quality Fund Ozone Soft Bag Infusion Sterilization Cabinet


