During the normal operation of the tablet press, the phenomenon of splintering may occur. When the tablet falls off after being pushed out of the die hole, it means splintering. With air, the speed of compression is relatively fast, and the gap between punching and die hole is relatively small. Come and see it with Shengde tablet press today.

Tableting machine
When the tablet press compresses, the air is not expelled from the granules, it is enclosed in the tablet, and when there is no pressure, the air expands which can cause splits.
What Shengde Tablet Press wants to tell you is that according to the above situation, we should first make a pre-compression device for the fine powder in the granules, so that the air may escape. However, many situations are unexplainable.
Splits will occur when the pressure is relatively large. Reduce the pressure during tableting to prevent splits. If the particles are too dry, splits will occur, so water content also plays a key role. .
The reason for the splits is the improper compression of the granules. The elasticity of the granules is relatively strong. The elasticity of the pressed tablet is relatively high, and the uneven pressure can also be caused.
When the single-punch tablet presses the tablet, the tablet is relatively compressed. When the rotary tablet presses the tablet, the upper and lower compression of the tablet is relatively large. The size of the pressure is related to the elastic recovery rate of the tablet.
Yes, the elastic recovery rate of the upper and lower surfaces of the tablet is relatively high, and the upper surface of the tablet is moved out of the die hole first, so it cracks first.
Shengde tablet press should explain that the possibility of splitting occurs when the pressure of the tablet press decreases during the pressing process is also small, and the recovery rate is also small. The compression time increases and the plasticity increases, which can prevent the phenomenon of splitting.
the amount of water content in the particles can shape the plasticity of the particles, improve the distribution of pressure and prevent the phenomenon of splitting, and a good amount of lubricant can also change the pressure distribution and prevent splitting.
The above is the industry sharing about tablet presses, I hope everyone can like it.

