Structural Characteristics Analysis Of Rotary Tablet Press

Jul 22, 2022

Leave a message

The outer shell of the rotary tablet press is fully enclosed, the material is stainless steel, and the inner table is made of stainless steel, which can maintain the surface gloss and prevent cross-contamination, and meet the requirements of gmp. 


The doors and windows with transparent glass can clearly observe the state of the tablet, and the side panels can be fully opened, which is easy for internal cleaning and maintenance. All controls and operating elements are well laid out. Today, Shengde Rotary Tablet Press will come to have a look with you.


SED-ZP41D1

Rotary Tablet Press


The rotary tablet press adopts the frequency conversion speed regulating device for electrical speed regulation, which is easy to operate, stable in rotation, safe and accurate. Equipped with overload protection device, it can automatically stop when the pressure is overloaded.


 Implement mechatronics, using touch keys and screen display. The transmission system is sealed in the oil tank under the main body of the machine, which is a completely separate and independent part, and there is no mutual pollution, and the transmission pair is soaked in the oil pool, which is easy to dissipate heat and wear.


Structural features of rotary tablet press:


1. The upper half of the rotary tablet press is a tableting structure: it is mainly composed of three parts: upper punch, middle die and lower punch. The tail of the rod is embedded on the fixed curved guide rail. When the turntable rotates, the upper and lower punches move up and down with the curved guide rail to achieve the purpose of tablet pressing.


2. The rotary tablet press only needs to be filled; pressed; and discharged. The short three-step procedure is carried out continuously, the filling and tableting has an adjustment control mechanism, and the instruction of the table is attached, which is easy to operate.


3. The rotary tablet press adopts a flow grid feeding mechanism, which can make the material evenly fill the die hole and reduce the difference in tablet weight.


4. The motor is installed in the base, and the worm drive turntable is driven by a V-belt, and a continuously variable pulley is installed on the motor shaft. Through the movement of the motor, the speed can be adjusted arbitrarily, and the use is safe, reliable, and noise-free.


5. There is a powder suction box on the side of the machine base, which includes a blower, a powder storage room, and a powder filter room. When the machine is running at a high speed, the flying powder and the powder falling from the middle mold are generated, and the powder is removed through the powder suction nozzle, so as not to stick The knot is plugged to keep the operation smooth and normal.


Rotary tablet press is a single-press automatic rotary continuous tablet press machine, which compresses granular raw materials into various tablets. It is mainly used in tablet production in the pharmaceutical industry, and is also suitable for chemical, food, electronics, plastic , Powder metallurgy and other industrial departments.


The above is the industry sharing that Shengde rotary tablet press brings to you, I hope you can like it.