How To Control The Loading Difference Of Semi-automatic Capsule Filling Machine

The semi-automatic capsule filling machine has fast filling speed and small size difference. This machine integrates the powder filling capsule shell finishing, capsule cap finishing, and capsule package, which is compact and convenient. It is suitable for small and medium batch production of small and medium-sized pharmaceutical factories, health care products factories, hospitals and clinics. If 2-3 sets are used at the same time, it can also be suitable for large batch production.
With the improvement of preparation technology, the preparation of hard capsules has been gradually transformed from simple manual preparation to mechanized preparation, and the following problem is the limit of the difference in the amount of capsules. Through the analysis and test of the factors that affect the difference of capsule loading, the problem of the difference of capsule loading has been solved. The quality of empty capsules and the quality of capsules directly affect the difference in the amount of capsules. The choice of drugs for empty capsules. There are eight different sizes of empty capsules. There are four kinds of capsules 0, 1, 2, and 3 commonly used in the preparation. Because of the different dosage, density, crystal state, particle size, and excipients of each drug, only after manually loading the Zui large amount of drugs, can you select the appropriate type of empty capsules, In order to obtain a small difference in loading capacity. Secondly, we should select the capsules with specifications and other quality standards, which should meet the quality standards of hollow capsules stipulated by the Ministry of Health in 1985. Secondly, empty capsules should be stored in an environment with temperature of 18-28 ℃ and humidity of 30% - 45%, and sealed. Because empty capsules contain 12% - 15% water, improperly stored capsules will absorb water or dehydrate, resulting in changes in the diameter and shape of the capsule and mechanical failure to fill.