Plasmids Produced By Capsule Filling Machine

Nov 24, 2022

Leave a message

The capsule filling machine is related to the boring granulation, crushing and destruction and inclusion process of the product production process. The bulk density of ordinary materials is measured by random sampling.


 The bulk density of filling materials is related to the material itself. It refers to the representative density of a part of the material, which cannot really represent the bulk density of the whole material. Of course, it is related to the average degree of granulation and crushing and the average degree of inclusion, especially the average degree of inclusion. 


The primary inclusion equipment of solid system includes two-dimensional and three-dimensional movable cylindrical, biconical and V-shaped inclusions. The average degree of inclusion is not only related to the type of inclusion equipment, but also related to the charging coefficient and inclusion time. When the filled powder or granule accumulates, the angle of repose of the granule is smaller than that of the powder, so the mobility of the granule is good, and the filling accuracy of the capsule is easy to control. 


The bulk density refers to the component of the unit volume of powder or granule. During the filling process, the component of the unit volume is large, and the mobility is good. It is also easy to control the filling accuracy of capsules; 


On the contrary, the component of unit volume is small, the mobility is poor, and it is difficult to control the filling accuracy of capsules. In addition, the hygroscopicity of filling materials is related to its critical relative humidity.


Generally speaking, when the purity of the filled powder or granule is not high, its critical relative humidity will be reduced, and multi-component will also add moisture absorption. Most of the capsule filling machines in China are based on the filling quantitative method. 


The filling volume is determined by the thickness of the measuring plate, which is related to the bulk density of the filling material. In addition, the control accuracy of filling volume is related to the influencing factors of filling structure and filling material itself.


1.Fully sealed structure, in line with GMP specifications;


2. Driven by Mitsubishi frequency converter, stepless speed regulation, and controlled by Mitsubishi PLC program;


3. Capsule loading rate ≥ 99%;


4. The filling plate is large and the filling volume is accurate;


5. Dividing box structure, dividing, low noise;


6. The transmission cams of each station are improved into high-quality materials, and are made into internal groove wheels for transmission, which is wear-resistant and runs smoothly;


7. The lower module extends with a high-precision double axis closed structure to ensure the rigidity, accuracy and balance of the module after extending;


8. ① The hanging button type operation is convenient to operate, economical and practical, durable and wear-resistant, and has two optional functions of timing, quantitative and capacitive induction blanking;

② Hanging touch screen operation, human-machine interface, PLC control, with timing, quantitative and capacitive induction blanking functions optional, convenient for customers to choose;


9. Granulation device can be equipped additionally.