The semi-automatic capsule filling machine has fast filling speed and small size difference. The machine integrates the powder filled capsule shell, capsule cap and capsule package, which is compact and convenient.
It is suitable for small and medium-sized pharmaceutical factories, health product factories, hospitals and clinics to produce in small and medium-sized batches. If 2-3 sets are used at the same time, it can also be suitable for mass production.
Avoiding cross contamination and energy saving: Redesign the capsule finished product discharge mechanism, omit the air compressor, thus reducing the overall dimensions and noise of the whole machine, avoiding cross contamination and movement failures caused by pneumatic discharge, and achieving significant energy saving effects.
The semi-automatic capsule filling machine is convenient to adjust the gap of the dosing plate. Only the angle of the gear spindle needs to be adjusted, it can drive the transmission gear to raise or lower the five support bolts at the same time; In view of the different characteristics of Chinese medicine and western medicine, the operation pressure required for filling is large.
Increase the cam size. Apply nitrogen treatment to the cam surface to increase the surface hardness, so as to ensure the service life and operation reliability of the capsule filling machine.
Precautions:
1. This equipment is a vibrating machine, and the fastening of screws at various parts should be checked frequently. If they are loose, they should be tightened in time to prevent failure and damage.
2. The plexiglass parts (worktable plate and drug plate) shall be protected from direct sunlight and high temperature, and heavy objects shall not be placed. The drug plate must be placed vertically or horizontally to avoid deformation and damage.
3. The shell and body of the electrical appliance must be grounded to ensure safety. Cut off the power after work.
4. After the semi-automatic capsule filling machine works every day, the residual drugs on the machine and in the mold hole should be cleaned to keep the whole machine clean and sanitary, and avoid washing the host machine with water. If the mold on the machine needs to be cleaned, loosen the fixing screw and take it down, which is convenient for installation.

