Analyze the causes and solutions of empty capsules in semi-automatic capsule filling machine
There are many reasons for empty capsules appearing on the capsule filling machine, including the hardness of the processed particles is too hard, and the gap between the copper plates is too large. What should we do once this phenomenon appears?
The reasons for this phenomenon and the solutions are explained as follows:
Why does the semi-automatic capsule filling machine appear empty?
1. What we need to consider is whether there are particles. If there are too many particles or the hardness is too hard, the activity of the capsules will be poor, resulting in empty capsules.
2. Considering the cause of the counting disc, if the counting disc is too thin, it will also affect its filling
amount, resulting in the phenomenon of empty capsule.
3. Consider whether the gap between the copper disk and the metering disk is too large. If it is too large, it will cause the powder to remain on the machine table, resulting in its empty bag.
4. What also needs to be considered is whether the punch is too viscous. If it is too viscous, it will become empty during machining.
What to do if the semi-automatic capsule filling machine overflows empty capsules:
1. If the phenomenon of empty bag appears, we need to carry out maintenance strictly according to the product process flow and automatic control standards, and the maintenance problems appear in that link.
2. If a hopper is added to the empty bag, it is necessary to set its detailed value, and move the value to a specific point for seeding.
3. We need to fill the cover of the upper template into the lower template, and carry out the lock removal processing, so that the locking characteristics can be firmly done, and the capsules can flow into the exact position.